Superhard Stone, Type 4
For saw-cut models, master models in crown and bridgework, and implantology
Resin-reinforced
Excellent flowability
Hard and smooth with stable edges
Compatible with all impression materials
Mixing ratio18 - 20 ml demin. Water: 100 g powder
Processing time approx. 9 min (22 °C)
Setting expansion0.10%
Compressive strength> 65 N/mm2 (24 h)
Colorwhite, yellow, apricot, green, light gray, gray
5 kg (REF 5000-5)
10 kg (REF 5010-5)
20 kg (REF 5020-5)
25 kg (REF 5030-5)
Super hard stone, type 4
For saw-cut models, master models in crown and bridgework, and implantology
Extra edge stability for saw-cut models
Resin-reinforced
Excellent flowability
Compatible with all impression materials
Mixing ratio18 - 20 ml demin. Water: 100 g powder
Processing time approx. 9 min (22 °C)
Setting expansion0.10%
Compressive strength> 65 N/mm2 (24 h)
Colorivory
5kg (REF 5006)
10kg (REF 5017)
20kg (REF 5026)
25kg (REF 5036)
Thixotropic super-hard stone, type 4
For saw-cut models, master models in crown and bridgework, and implantology
Stable consistency for building up
Very thin-flowing under vibration
Plastic-reinforced
Compatible with all impression materials
Mixing ratio20 ml demin. Water: 100 g powder
Processing time approx. 5-6 min (22 °C)
Setting expansion0.10%
Compressive strength> 65 N/mm2 (24 h)
Colorcream
5kg (REF 5100)
10kg (REF 5110)
20kg (REF 5120)
25kg (REF 5130)
Base plaster, type 4, thin-flowing
For base casting of tooth crowns using the split-cast technique
Easy flow around pins and tooth crowns
High final hardness and smooth surface
Mixing ratio23 ml demineralized water : 100 g powder
Processing timeapprox. 6 - 8 min (22 °C)
Setting expansion 0.10%
Colorraspberry red and royal blue
5kg (REF 5200-1)
10kg (REF 5210-1)
20kg (REF 5220-1)
Hard Stone, Type 3
For opposing bite models as well as master and working models in the model casting and resin technique.
Ideal processing viscosity
Excellent setting expansion (comparable to Type 4 stones)
Smooth and abrasion-resistant surfaces
Mixing ratio30 ml demin. Water: 100 g powder
Processing timeapprox. 6 min (22 °C)
Setting expansion0.15%
Compressive strength> 30 N/mm2 (24 h)
Coloryellow and blue
5kg (REF 5300-1)
10kg (REF 5310-1)
20 kg (REF 5320-1)
25kg (REF 5330-1)
Articulating Plaster, Fast
For quickly fixing models in the articulator
Also for fixing relinings and creating matrixes
Ideal for orthodontic techniques
Very low setting expansion
Mixing ratio30 ml demineralized water : 100 g powder
Processing timeapprox. 2 min (22 °C)
Setting expansion 0.08%
Compressive strength> 20 N/mm2 (24 h)
Colorwhite
5kg (REF 5400)
10kg (REF 5410)
20kg (REF 5420)
25kg (REF 5430)
